Duvart Sedef Decorative Wall Paint
Duvart Sedef Decorative Wall Paint is a water-based, acrylic emulsion-based, silk-matte, mother-of-pearl-looking, fully erasable, decorative topcoat interior paint that gives the surfaces a pearly texture. Surfaces on which pearlescent paint will be applied must be smooth, solid, dry and self-supporting surfaces. Surfaces must be covered with putty. With the mother-of-pearl effect created by the layers in which the light is reflected differently, it gives a pearly elegance to the surface on which it is applied. Mother-of-pearl-looking patterns can be obtained with different application methods of Duvart Sedef Decorative Wall Paint. Except for the color chart , there are 2 bases as gold and silver. Permocolor color tubes or an unlimited number of colors can be obtained with a coloring machine.
Duvart Sedef Decorative Wall Paint Technical Specifications
Appearance: Semi-matt, decorative-looking interior paint.
Colour: Silver, Gold
Viscosity: 104 ± 5 KU/25°C
Intensity: 1.07 ± 0.02 gr/cm3
Solid Matter : 39 ± 2 (120oC 30 dak)
pH : 8,5 ± 1
Consumption Amount: According to the surface conditions and the desired decorative appearance
is variable. 15 – 22 m2/L area can be painted in one coat.
Controlled sample study is recommended for precise consumption.
Drying Time: Touch dry 30 min
(23oC 50% HR) Full drying 24 hours
Waiting time between floors 6 hours
Flash Point: – (Does not shine)
Packaging shape: 15 L – 2.5 L – 0.75 L.
How to Prepare Before Painting?
New Plastered Surfaces: By reviewing the surfaces, all layers that cannot carry themselves are cleaned and
should be removed, free sand, dust and oil should be removed from factors that reduce the adhesion strength. Application surfaces must be completely dry. Therefore, newly plastered surfaces should be waited for at least 20 days for the plaster to set. Cracks, pits or breaks, if any, on the surfaces Permolit Permomacun Water Based Super Acrylic Interior Wall Putty should be corrected with Mold release oils used in exposed concrete must be cleaned absolutely.
Old painted surfaces: All layers that cannot support themselves should be cleaned and removed. The level differences that may occur should be corrected by puttingty with Permolit Permomacun Water Based Super Acrylic Interior Wall Putty. Before starting the application, it should be checked that the surface is clean, sound, dry and dust-free.
Lining: To ensure the adhesion of the free micronized powders on the surfaces with the surface preparation and to ensure the adherence.
plaster surfaces to increase Permolit Permolak Water Based Acrylic Primer or Permolit Permosar Silicone Primer on very absorbent surfaces such as plaster and putty. Permolite Permobinder It is recommended to apply a single coat. If a color change is desired on old painted solid surfaces Permolit Permokapar Covering Primers It is necessary to wait at least 6 hours for the primer to dry before applying the topcoat.
Thinning: It is not thinned, ready to use.
How is Duvart Pearl Paint Applied?
In order to reduce the consumption of mother-of-pearl paint, after the primed surface is saturated with a high-quality plastic paint, mother-of-pearl paint should be applied. If a color difference is desired in the background, DuvART Sedef is applied as a single layer with a satin roller on Permolit Permosil Silicone Interior Wall Paint applied in two layers and the desired pattern is given before it dries. If a color difference is not desired in the background, DuvART Pearl is applied to the surface with a satin roller in two coats like a normal paint and the desired pattern is given before the third coat dries. Patterning should be completed before the mother-of-pearl paint dries.
